GRYPHON HOUSE 1 Set 5PCS 1/4” DIY Drill Bit Set Carpentry Cutting To…

These rasps are made of durable Steel, which is great to easily and quickly remove larger pieces of wood. * The rotary rasps set can work with mostly rotary tools for DIY wood carving. * This rotary burr tool is a must have for you DIY woodworking project. Features: - Applied to engraved designs, chamfering, hollow out, grooving, reaming, and so on. - Basically replace with handle small grinding wheel and no dust pollution. - Convenient to grind and fit for most of electric drill, easy to install, safe and reliable use. - Used for grinding, polishing, shaping and burnishing wood, plastics and rubber surfaces. Specification Color: Material: 45# Steel Shank Diameter: 6.3mm/1/4inch Length: Approx. 50-60mm Shapes: Round/Oval/Cylinder/Large/Small Cone Package List: 5 x Rotary Burr Rasp Set Note: 1. It's not applicable to hardwood. 2. The cutting direction is from right to left even move, not like grinding wheel used for reciprocating cutting.
Package Dimensions ‏ : ‎ 3.86 x 2.52 x 0.47 inches; 3.14 Ounces
Date First Available ‏ : ‎ October 13, 2022
Manufacturer ‏ : ‎ GRYPHON HOUSE
ASIN ‏ : ‎ B0BH2RV6RH

Material: Made of 45 high speed steel material, through fire dipped black surface treatment, ensuring its sharper and durable.
Package include: 5 shapes in total, Ball, Oval, Cylinder, Large and Small cone, Rotary Rasp Burr Set Carving File Rasp 1/4 "6mm Shank Drill Bits Woodworking.
Widely use: It is suitable for grinding, polishing, shaping, carving, chamfering, deburring and burnishing. It is perfect for low hardness of the workpiece, such as soft wood and plastic.

2023-09-21T20:43:44+00:00September 21st, 2023|Chisels, Hand Tools, Power & Hand Tools, Tools & Home Improvement, Wood Chisels, Woodworking Amazon|
Read More

Apollo Tools Original 39 Piece General Household Tool Set in Toolbox …

The Apollo Tools 39-Piece General Tool Set is the original and much-copied small toolset in an easy to carry case. It includes essential and basic tools everyone needs for do it yourself repairs, maintenance, and crafts. Perfect for a first home, for the dorm, or the trunk of the vehicle. This great little toolset includes - 6.5" Lineman pliers - 8 oz. Claw hammer - 12 ft. Tape measure - utility knife - 8" Scissors - four precision screwdrivers: Phillips #1, #0, slotted 3/32”, 1/8” - bit driver - 2" Bit connector - ten 1" Bits: 1/8”, 5/32”, 3/16”, 1/4”, PH1, PH2, PH3, PZ1, PZ2, PZ3 - ten 1" Bits: T10, T15, T20, T25, T27, T30, 1/8”, 5/32”, 3/16”, 1/4” - eight SAE hex keys: 1/16”, 5/64”, 3/32”, 1/8”, 5/32”, 3/16”, 7/32”, 1/4”.
ESSENTIAL DIY TOOLS: This compact tool kit contains the most useful tools for basic DIY household repairs. Picture hanging, box opening, screw tightening, this is the perfect starter kit for home repairs.
MOST REACHED FOR DIY HAND TOOLS: Includes 8oz. claw hammer, 6.5" lineman pliers, tape measure, utility knife, bit driver with 2” bit extension and 20 most popular bit sizes, precision screwdrivers for small screws, 8 hex keys and a pair of scissors.
STURDY COMPACT STORAGE CASE: Tools are neatly stored in a sturdy case to keep them secure, clean, organized and easy to find.

2023-09-18T20:40:33+00:00September 18th, 2023|Hand Tools, Power & Hand Tools, Tool Sets, Tools & Home Improvement, Woodworking Amazon|
Read More

KAKURI Rabbet Plane for Woodworking 12mm Adjustable Double Side Blade…

From the brand KAKURI Japanese woodworking toolsKAKURI Japanese woodworking tools

KAKURI JAPAN Since 1946

A Master Touch in Every Tool

Best Sellers from KAKURI

Japanese Plane

Japanese Chisel

Japanese Saw (Double-Edge)

Japanese Saw (Single-Edge)

Japanese Saw (Mini & Folding)

Kiridashi Knife

Japanese Wood Carving Tools

Genno Japanese Hammer

Other Japanese Hammer

Wooden Nails

Other Woodworking Tools

Other Woodworking Tools


DOUBLE SIDED BLADE: Since it has blades on both sides, you can cut from either side of corner in a direction that does not go against the grain of the wood.
RAZOR JAPANESE STEEL BLADE: Only Japanese high-grade materials are used. The plane blade is razor-sharp, durable, and realizes clean cut surface. It is sharp right out of the box. All KAKURI brand products are manufactured in Japan and handcrafted by Japanese craftsmen.
JAPANESE STYLE PULL PLANE: Unlike western planes, it uses pulling force rather than pushing force to cut the wood. This structure makes it easy to apply uniform force.
PRODUCT SPECIFICATIONS: Blade: Japanese high carbon steel / Body: Oak / Size: 8.2 x 2.0 x 2.3 inches / Adjustable Cutting Width: 0 - 12 mm (0 - 0.47 inch) / KAKURI Official English Instruction is included / Made in JAPAN
2023-09-16T20:38:55+00:00September 16th, 2023|Hand Planes & Accessories, Hand Tools, Japanese Planes, Power & Hand Tools, Tools & Home Improvement, Woodworking Amazon|
Read More

Amazon Basics Household Tool Kit With Storage Case, 142 Piece, Turquo…

Amazon Basics Household Tool Kit with Tool Storage Case - 142-Piece, Turquoise
Includes essential tools plus basic hardware set
Corrosion-resistant, heat-treated plating for durability
Blow-molded storage case protects tools and keeps them organized between uses
Easy-grip, non-slip tool handles

2023-09-13T20:32:50+00:00September 13th, 2023|Hand Tools, Power & Hand Tools, Tools & Home Improvement, Woodworking Amazon|
Read More

WoodRiver 6 Piece Bench Chisel Set


Set includes 1/4”, 3/8”, 1/2”, 5/8”, 3/4” and 1” chisels.
Blades are CRV Steel
RC 59-63 - Genuine Bubinga Handles
WoodRiver is proudly made by Woodcraft, America’s leading supplier of professional quality woodworking tools and supplies. Our award winning family of brands includes WoodRiver, Highpoint, Pinnacle, Woodcraft and Woodcraft Magazine.

2023-09-12T20:31:25+00:00September 12th, 2023|Hand Tools, Power & Hand Tools, Tools & Home Improvement, Woodworking Amazon|
Read More

Amazon Basics 3-Piece Long Reach Pliers Set, Black

Amazon Basics Long Reach Pliers Set - 3-Piece
Extra-long, 11-inch length provides easy access to tight spots and narrow spaces; keeps hands a safe distance from hot surfaces and sharp edges
Made of high-quality alloy steel for reliable, long-lasting strength; plastic-dipped handles provide a secure, comfortable grip
Suitable for a home garage, professional auto body shop, construction site, or carpenter’s tool box
Backed by an Amazon Basics 1-year limited warranty

2023-09-07T20:25:19+00:00September 7th, 2023|Hand Tools, Power & Hand Tools, Tools & Home Improvement, Woodworking Amazon|
Read More

Bates- Nail Puller, Pliers, Nail Remover Tool, Cutting Pliers, Carpen…

From the brand Brand Story - BatesBrand Story - Bates

Painting Supplies

Wall Plates

Tools

Cable Clips

Plugs


Made From High Carbon Steel For Long Lasting Performance And Preventing Rust
Soft Plastic Coated Grip
Dual Use End Nipper Pliers To Cut Wires Or Nails Or Simply Pull Them Out
Perfect For Carpenters, Construction, Handymen, Installing New Floor, Etc.
2023-09-06T20:24:50+00:00September 6th, 2023|Hand Tools, Power & Hand Tools, Tools & Home Improvement, Woodworking Amazon|
Read More

Peachtree Woodworking Supply 2 Pack of 4 Way Pressure Clamps For Clam…

From the brand main bannermain banner

Table Saw Accessories

Abrasives

Clamps and Accessories

Dust Collection

Drilling Accessories

Glue Up Accessories

Measuring

Safety

Sharpening

Woodturning


Clamping Panels Can Certainly Be A Challenge. Especially When We Try To Use Everyday Pipe Clamps Or Bar Clamps. While These Types Of Clamps Work Fairly Well On Certain Glue Up Projects, The One Thing They Don’T Do At All Is Apply Pressure From The Top And Bottom Of The Panels During Glue Up. In Fact, With All The Pressure Being Applied On Both Sides, Bar And Pipe Clamps Will Almost Certainly Bow, Buckle Or Rack Your Panel Glue Up Project
Let’S Make Racked Panel Glue Ups A Thing Of The Past. With A Simple Turn Of The Rotating Clamp Handle, All Four Sides Of The Clamp Will Draw Inward At The Same Time
Build Any Length Clamp With The Durable Plastic Bars With 4 Notches For Maximum Adjustability To Handle A Variety Of Stock Widths. Clamp Can Be Used For Boards Up To 6 Inches In Thickness By Simply Adjusting The Clamp Width Capacity With The Appropriate Number Of Notches. Turn The Handle Clockwise To Tighten The Clamp And Turn The Handle Counter Clockwise To Release Pressure. The 4 Way Pressure Clamp Is Equipped With Side Pressure Pads To Prevent Damaging Your Stock
Now You Can Confidently Glue Up Wide Boards, Shelving, Table Tops, And More Up To 6” Thick. To Setup The Clamps Simply Attach The Clamp To Any Length 2 X 2’S (2” X 4” Ripped In Half) With The The Wood Screws That Are Provided, Apply Wood Glue To Your Project, Set The Clamps On To Your Panel Boards And Turn Handle To Tighten The Clamp On All Four Sides. We Recommend That You Place A 4 Way Pressure Clamp Every 12” To 18” For Best Results.
2023-09-04T20:22:16+00:00September 4th, 2023|Hand Tools, Power & Hand Tools, Tools & Home Improvement, Woodworking Amazon|
Read More

DEWALT Mechanics Tools Kit and Socket Set, 142-Piece, 1/4 & 3/8″ Driv…

This 142-piece DEWALT Mechanic Tool Set is a versatile choice with two pear head ratchets, a variety of sockets, extensions, universal joints and adapters. The tool sets for mechanics come in a durable case featuring metal latches for added security of the tool sets for mechanics. The 72 tooth count ratchets come equipped with a quick release button to easily attach or remove a socket. The sockets included DirectTorque technology to help prevent rounding of fasteners and provide better grip.
Ratchets include a low profile directional lever to help reduce catch points and for easy one-handed operation of the mechanics tool set
Mechanics tools have full polish chrome finish for corrosion resistance
Hard stamped markings on sockets and wrenches for easy identification
Knurled beauty rings help reduce slippage for hand tightening applications

2023-09-03T20:21:02+00:00September 3rd, 2023|Hand Tools, Power & Hand Tools, Tools & Home Improvement, Woodworking Amazon|
Read More

Amazon Basics Angled Wrench Set – SAE, 14-Piece

Amazon Basics Angled Wrench Set - SAE, 14-Piece
Manufactured from long-lasting, durable materials, drop forged and hardened treated
Includes 3/8", 7/16", 1/2", 9/16", 5/8", 11/16", 3/4", 13/16", 7/8", 15/16", 1", 1-1/16", 1-1/8",1-1/4"
Includes nylon roll-up case for convenient storage and portability
Backed by an Amazon Basics limited one-year warranty

2023-08-30T20:15:44+00:00August 30th, 2023|Hand Tools, Power & Hand Tools, Tools & Home Improvement, Woodworking Amazon|
Read More

Amazon Brand – Denali 200-Piece All-Purpose Tool Kit and Socket Set w…

The set comes with a (10) 1/4"drive sockets (3/16", 7/32", 1/4", 9/32", 5/16", 11/32", 3/8", 7/16", 1/2",9/16") (14) 1/4"drive sockets (3.5, 4, 4.5, 5, 5.5, 6, 7, 8, 9, 10, 11, 12, 13, 14mm) (10) 1/4"drive deep sockets (1/4, 9/32, 5/16, 11/32 in.; 4, 5, 6, 7, 8, 9mm) 1/4" drive 3" extension bar Teardrop quick-release ratchet Spinner handle with bit coupler (8) 3/8" drive sockets (5/16", 3/8", 7/16", 1/2", 9/16", 5/8", 11/16", 3/4") (8) 3/8" drive sockets (9, 10, 12, 13, 14, 15, 17, 19mm) (5) 3/8" drive deep sockets (7/16", 1/2", 9/16", 11/16", 3/4") (6) 3/8" drive deep sockets (12, 13, 14, 15, 17, 19mm) (2) 3/8" drive extension bars (3" & 6") 5/8" spark plug socket Adapter Dual material teardrop quick-release ratchet (5) 1/2" drive sockets (1/2", 9/16", 5/8", 3/4", 7/8") (5) 1/2" drive sockets (15, 17, 18, 19, 21mm) 14 Combination wrenches with mirror finish (1/4", 5/16", 3/8", 7/16", 1/2", 9/16", 5/8" & 7, 8, 10, 12, 13, 14, 15mm) 50 screwdriving bits & holders 40 hex keys 6 inch long nose pliers 2 stubby screwdrivers (1/4" x 1.5" & 2" x 1.5") 2 screwdrivers (1/4" x 4" & 2" x 4") 12 nut driver bits (1/4", 5/16", 11/32", 3/8", 7/16", 1/2" & 6, 8, 9, 10, 11, 12mm)
Premium heat-treated carbon steel construction and chrome flash offers durability and rust resistance
Blow-molded carrying case with dedicated space for each tool; easy storage and transport
Perfect for both the DIY enthusiast or professional
Dimensions: 20.78 x 16.85 x 4.1 inches (LxWxH)
The product is covered by the Hand Tool Limited Lifetime Warranty

2023-08-26T20:10:19+00:00August 26th, 2023|Hand Tools, Power & Hand Tools, Tools & Home Improvement, Woodworking Amazon|
Read More

DEWALT Metal Cutter Drill Attachment, Sheet Metal Cutter, 360 Degree …

The DEWALT DWASHRIR Impact Ready Shears Attachment is able to cut up to 18GA material including but not limited to: Sheet metal, corrugated sheet metal, duct, asphalt shingles, steel mesh, vinyl siding, wire, plastics, cardboard and rubber. This tool features a 360 degree swivel head that allows for maneuverability when cutting. Connects via standard 1/4-inch hex shank. This attachment works with most 18V-20V impact driver and drills, regardless of brand. Attachment only, drill not included.
360 degree swivel head for maneuverability
Connects via standard 1/4-inch hex shank
Compatible with most 18V-20V impact driver and drills
Able to cut up to 18GA material
Connects via standard 1/4-inch hex shank
Compatible with most 18V-20V impact driver and drills

2023-08-24T20:07:02+00:00August 24th, 2023|Hand Tools, Power & Hand Tools, Tools & Home Improvement, Woodworking Amazon|
Read More

90 Degree Clamp Corner Clamp – Right Angle for Woodworking 4 Pack 5.5…

From the brand 11 11

Welcome to Vdsfand！

Adhering to the integrity of management, the principle of steady development.Committed to provide consumers with quality products and services, and constantly meet the needs of consumers.Quality product and customer - oriented service concept, give you the highest shopping experience

product


【Help You Create the Perfect 90° Angle】Corner clamps for woodworking is a precision woodworking tool designed to help you easily create the perfect 90 degree Angle. No longer worry about inaccurate angles, it ensures that your work is flawless and makes your carpentry projects more refined and professional.
【Super Fixing Ability】Corner clamp adopts L-type angle clamp design and is equipped with 4 fixing holes to provide super stable balance and ensure super fixing ability. These corner clamps can hold the workpiece tightly and not loosen, providing you with solid support.
【Does Not Damage Fragile Cutting Edges】Unlike other clamps, clamps for woodworking uses a clever hypotenuse design. This means that when gripped, it does not cause any damage to the fragile cutting edge. You can do carpentry cutting, finishing and other operations without worrying about material damage.
【More Accurate Scale】90 degree clamp not only has metric size scale, but also has a double engraving design for imperial size. No matter which scale you use, this corner clamp will provide extremely accurate measurements to ensure that your woodworking project is error-free.
2023-08-23T20:00:41+00:00August 23rd, 2023|Hand Tools, Power & Hand Tools, Tools & Home Improvement, Woodworking Amazon|
Read More

WETOLS Corner Clamp, 90 Degree Right Angle Clamp for Woodworking,4Pcs…

From the brand corner clampcorner clamp corner clampcorner clamp angle clampangle clamp corner clampcorner clamp

WETOLS Woodworking Clamps

Great Gifts for Dad, Husband, Grandpa, DIYers.

How did we get our start?

Most tools are made for professionals and not DIYers like ourselves. There was a gap in the market so we made it our mission to fill that void.

What makes our products unique?

Want to fix something but not a skilled tradesmen? We feel your pain. We set out to create innovative hand tools that turns the Average Joe into the Everyday Pro.

Why do we love what we do?

Starting a new project can be intimidating. Our products save time, money ,and headaches, allowing the weekend warrior to be more productive and to GET STUFF DONE.

WETOLS Corner Clamps

WETOLS Angle Clamps


Please allow 0.02-0.08 inches differences due to manual measurement.
【Cool Gadgets Gifts for Men】It comes with a nice gift box, which can be great gifts for Men Dad Husband Grandpa. A set of 4 corner clamps is perfect for aligning, nailing, woodworking, welding, screwing, making cabinets, box, and picture reinforcement, furniture repair connection, wooden DIY projects, etc.
【Adjustable and Accurate】Fast fixing wood boards and frames at an angle of 90 degrees. Fit boards with a thickness of 3/16" - 3/4" for 90-degree corners and T-joints.
【Superior quality】 The WETOLS corner clamp is made of premium quality polyamide material, which is durable for long service life.
【Strong Flexible Spring】 Huge spring tension can keep boards sturdy in place when screwing or gluing them together.
【Single-handed Operation】WETOLS right angle clamp is lightweight and convenient, which can be operated with one hand.
2023-08-19T19:55:39+00:00August 19th, 2023|Hand Tools, Power & Hand Tools, Tools & Home Improvement, Woodworking Amazon|
Read More

90 Degree Clamp Corner Clamp – Right Angle for Woodworking 4 Pack 5.5…

From the brand 11 11

Welcome to Vdsfand！

Adhering to the integrity of management, the principle of steady development.Committed to provide consumers with quality products and services, and constantly meet the needs of consumers.Quality product and customer - oriented service concept, give you the highest shopping experience

product


【Help You Create the Perfect 90° Angle】Corner clamps for woodworking is a precision woodworking tool designed to help you easily create the perfect 90 degree Angle. No longer worry about inaccurate angles, it ensures that your work is flawless and makes your carpentry projects more refined and professional.
【Super Fixing Ability】Corner clamp adopts L-type angle clamp design and is equipped with 4 fixing holes to provide super stable balance and ensure super fixing ability. These corner clamps can hold the workpiece tightly and not loosen, providing you with solid support.
【Does Not Damage Fragile Cutting Edges】Unlike other clamps, clamps for woodworking uses a clever hypotenuse design. This means that when gripped, it does not cause any damage to the fragile cutting edge. You can do carpentry cutting, finishing and other operations without worrying about material damage.
【More Accurate Scale】90 degree clamp not only has metric size scale, but also has a double engraving design for imperial size. No matter which scale you use, this corner clamp will provide extremely accurate measurements to ensure that your woodworking project is error-free.
2023-08-16T19:51:03+00:00August 16th, 2023|Hand Tools, Power & Hand Tools, Tools & Home Improvement, Woodworking Amazon|
Read More

Grip Clamp, 2 Pack 4 Inch Clamps for Woodworking F Clamp C Clamp, Woo…

Grip Clamp, 2 Pack 4 Inch Clamps for Woodworking F Clamp C Clamp, Woodworking Clamps, Wood Working Tools, Bar Clamp, Wood Working, Wood Tools 10 inch Grip Clamps, Pack of 2 Pistol grip with squeeze trigger tightens clamp; quick-release button Constructed with Hardened Steel Bar to Prevent Bending and Flexing Soft PVC pads provide superior grip and protect delicate finishes; removable One-handed Quick-Release trigger releases Easy to reverse jaws turns clamp into spreading clamp or stretching tool
Pistol grip with squeeze trigger tightens clamp; quick-release button
Constructed with Hardened Steel Bar to Prevent Bending and Flexing
Soft PVC pads provide superior grip and protect delicate finishes; removable
One-handed Quick-Release trigger releases Easy to reverse jaws turns clamp into spreading clamp or stretching tool

2023-08-10T19:42:23+00:00August 10th, 2023|Hand Tools, Power & Hand Tools, Tools & Home Improvement, Woodworking Amazon|
Read More

Anndason 6 PCS Hand Tool Toggle Latch Clamp 201B,220 Lbs Holding Capa…


New brand and high quality. Suitable for heavy duty.
Size: 95 x 37 x 37mm/ 3.7" x 1.5" x 1.5" (L*W*H). Holding capacity force: 220 lbs.
Latch Clamp 201B with plastic cover handle, easy, safe and comfortable operation. Material: Metal, Plastic, Rubber Cushion.
Universal toggle latch,widely used in different fields,vehicle,packing case,mechanical equipment,engineering machinery.

2023-08-05T19:32:13+00:00August 5th, 2023|Hand Tools, Power & Hand Tools, Tools & Home Improvement, Woodworking Amazon|
Read More

Amazon Basics Wood Graining Set, 3-Pieces

Amazon Basics Wood Graining Set, 3-Pieces
Product Dimensions ‏ : ‎ 6.5 x 4 x 1.5 inches; 2.8 Ounces
Item model number ‏ : ‎ GT3-AZ
Date First Available ‏ : ‎ February 16, 2021
Manufacturer ‏ : ‎ Amazon Basics
ASIN ‏ : ‎ B08D9QK65H
Country of Origin ‏ : ‎ China

Easy to use: simulates a natural wood-grain pattern using a simple, straightforward technique
Versatile: can be used on almost any flat surface to create a variety of different wood patterns, like cathedral oak, pine, and cedar
Durable construction: consists of 30% polypropylene, 10% TPR, and 60% vinyl for long-lasting strength
Easy to clean and warranty: can be washed and reused; backed by an Amazon Basics 1-year limited warranty

2023-08-04T19:31:11+00:00August 4th, 2023|Hand Tools, Power & Hand Tools, Tools & Home Improvement, Woodworking Amazon|
Read More

Kings County Tools Right Angle Clamp | For Clamping Joints in Woodwor…

This is the companion to the Face Frame Clamp . Its design makes it ideal for the classic torsion-box construction - holding a board up to 7/8" thick of any length.
GREAT FOR HOBBYISTS - Holds boards up to 7/8 inch thick of any length
USE AS ONE OR TWO - Can be bought singly, but pair is recommended, and works well with the Face Frame Clamp
MULTIPURPOSE USE - Great clamp for keeping any type of hardwood or softwood boards together
Made in Taiwan

2023-07-30T19:21:59+00:00July 30th, 2023|Hand Tools, Power & Hand Tools, Tools & Home Improvement, Woodworking Amazon|
Read More

Gerber Gear Suspension-NXT 15-in-1 Multi-Tool Pocket Knife Set – EDC …

Taking design cues from the original, the suspension-next is the evolution of a classic. Boasting an increased tool count of 15 in a lighter, thinner design, it fits comfortably Clipped in a pocket, or on a belt.  New to the suspension-next is a wire stripper, medium flathead driver, awl, file, and ruler but the benchmark  features remain: all outboard tools, all locking tools, and spring-loaded jaws.
SURVIVAL GEAR AND EQUIPMENT: Made from stainless steel that will stand the test of time and conveniently travel with you with a tool lock, lanyard point, and pocket clip
SLIM DESIGN: Easily accessible and fits compactly in a pocket or attached with a pocket clip; Butterfly opening and locking feature protects when not in use
CAMPING ACCESSORIES: Great for any hunter, tradesman, and the everyday carry consumer; Perfect addition to camping essentials, toolbox, work wear, and fishing and hiking gear
CONVENIENT SIZE: 4.25" closed length and 6.5" open length; 6.4 oz weight; Backed by the Gerber Guarantee, a limited lifetime warranty

2023-07-23T06:24:17+00:00July 23rd, 2023|Hand Tools, Power & Hand Tools, Tools & Home Improvement, Woodworking Amazon|
Read More

Jorgensen 6 inch Bar Clamp Set, 4 Pack Steel F Clamp Light Duty, 300 …

From the brand 11

Clamps

Clamps

Clamps

Vise

Clamps

Clamps

Hand Tools

Hand tools

22
Load limited: The bar clamp allows maximum pressure of up to 300 lbs and a metal latching mechanism that minimizes the warping and distortion of the workpieces, suitable for household repairs and your other DIY needs. It comes with 4-pack clamps, providing more than 1200 pounds of clamping force on your workpieces.
Quick-Adjust Design: The multiple-disc clutch design allows the sliding head to hold security at any position along the bar clamp. And the fast-acting sliding head is threaded, making the sliding head fixed firmly at any point on the rod.
Premium Design: The ergonomic soft grip handle is threaded, making it non-slip and comfortable. Fine-tuning the knob can increase grip and precision. The soft and durable plastic pad protects your workpiece, reduces the indents and does not damage the object's surface.
Application: Designed for widely light-duty clamping projects. Suitable for hobbyists, carpenters, woodworkers, metalworkers and professional tradespeople.
2023-07-22T06:22:25+00:00July 22nd, 2023|Hand Tools, Power & Hand Tools, Tools & Home Improvement, Woodworking Amazon|
Read More

Impact Grade Socket Adapter/Extension Set Turns Power Drill Into High…

Professional Services
If you have any doubts about our products, please feel free to contact us. 
After you receive the product, if you have any question about the use of methods and product performance, we will provide you with professional, caring sales service.
We offer a 30 day money back guarantee along with a 12 month replacement warranty.
About 1/4-Inch Drive Drill Socket Adapter/Extension Set
Suitable for Quick Change 1/4" Chuck Systems or Directly into Drill Chuck.
Turns any power/cordless drill into a power nut driver.
Handy for Fast Driving of Nuts, Bolts and Fixings, etc.
Spring Loaded Ball Bearing on Head Holds Sockets Securely.
Widely used in home DIY, carpentry, auto parts, specializing in machine repair and so on.
Specification :
Weight: Approx.100g
All Sockets Standard 1/4" Hex Shank
Key Features: 
1. Adapts sockets to power drills and drivers
2. Detent ball for secure socket retention so sockets snap on tightly and won’t slip off
3. 1/4-inch hex shank prevents stripping during high speed drill operation
4. Super strong heat-treated chrome vanadium steel for normal and impact use
5. Sandblasted finish
6. Converts all power drills into speedy socket drivers
7. Use with a hand screwdriver handle or battery/power tool
8. Color coded for easy recognition 
Size:
1/4 * 1/4 * 65mm length -- 1/4 " shank can be converted to 6.35mm square head
3/8 * 1/4 * 65mm length -- 1/4 " shank can be converted to 9.4mm square head
1/2 * 1/4 * 72mm length -- 1/4 " shank can be converted to 12.6mm square head
Package Included:
1 x (1/4" hex shank to 1/4" socket)Socket Adapter
1 x (1/4" hex shank to 3/8" socket)Socket Adapter
1 x (1/4" hex shank to 1/2" socket)Socket Adapter
☞USES: Attach these Versatile Extender Bars to any Powered/Cordless Drill Chuck or Impact Driver to turn it into a High-Speed Nut Driver – Useful for Automotive Mechanic Vehicle Repairs, Technicians, Handyman & Hobbyist Developments to use with sockets on Hardware/Tire Nuts, Lag Bolts, Hex Head Cap Screws at Home, Workshop Factory or Construction Site.
☞Multifunction: used in the installation of pneumatic screwdriver, electric screwdriver, pneumatic drill, manual screwdriver and other installation for the hexagonal tool .It is a good accessory for conversion.Provides versatility and convenience no matter which tool you chose to use. Great for the DIY, household maintenance, and most general repairs, not for industrial work. A great tool addition to any tool box set.
☞Durability: Quality is a guarantee with this 3 piece sturdy and durable solid steel set designed to withstand torque compression under most standard use situations. The exterior anti-weathering coating provides extra protection from damage against elements and substances such as oil and fluids that may come in contact with the extension bars during use with repairs such as in the automotive field.
☞Warranty: We believe in our products there for we offer a 30 day money back guarantee along with a 12 month replacement warranty for this high quality product.(3 socket adapter impact hex shank bit drill bits driver 1/4" 3/8" 1/2" bar set new grade adapter/extension turns power into high speed nut driver. 1/4", 3/8", and drive. piece he x set.hex new. extension 3pc for automotive,dyi home repair tool kits hand tools sockets sets, square wrench)

2023-07-19T06:19:44+00:00July 19th, 2023|Hand Tools, Power & Hand Tools, Tools & Home Improvement, Woodworking Amazon|
Read More

Amazon Basics No.4 Adjustable Universal Precision Smoothing Bench Han…

Amazon Basics No.4 Adjustable Universal Precision Smoothing Bench Hand Plane with 2-Inch Blade and Wooden Handles
Durable cast iron body provides stability and strength
Impact-resistant wood handle with contoured grip
Durable steel alloy blade makes quality cuts
Adjustable gear that allows you to achieve precise results

2023-07-15T06:14:33+00:00July 15th, 2023|Hand Tools, Power & Hand Tools, Tools & Home Improvement, Woodworking Amazon|
Read More

Amazon Basics No.4 Adjustable Universal Bench Hand Plane with 2-Inch …

Amazon Basics No.4 Adjustable Universal Bench Hand Plane with 2-Inch Blade for Precision Woodworking
Excellent control: Impact-resistant plastic handle with contoured grip;
Durable steel blade: Durable steel alloy blade makes quality cuts;
Easy adjustments: Adjustable gear that allows you to achieve precise results;
Notes: Do not use it directly without adjusting the "factory setting" after receiving the item, please follow the Point 5. Assembly/Disassembly of the user manual.

2023-07-13T06:12:21+00:00July 13th, 2023|Hand Tools, Power & Hand Tools, Tools & Home Improvement, Woodworking Amazon|
Read More

Spec Ops Tools 9.5″ Trim Bar, High Carbon Spring Steel, Built In Rule…

The Spec Ops Tools 9.5” Trim Bar is the perfect addition to any professional’s pry bar selection. This pry bar is constructed from rugged and durable high-carbon spring steel to mitigate any bending or snapping while in use, ensuring that this elite bar is made to last. Unlike other pry bars or scraper bars in the market, we've added a small, 4” ruler for fast and accurate measurements when working on a job site. Exceeding expectations on any mission, the sharp beveled edges are critical for applications such as trim/molding removal, scraping, demo work, and prying. The 90 degree strike surface end with sharp edge is best used for siding nail removal or prying between finish work. For additional functionality, this trim bar comes with a nail puller, nail pulling slots for shingles, and an onboard bottle opener. This bar has been drop tested at 100 feet to surpass MIL-SPEC standards. All Spec Ops tools are backed by our five-star, hassle-free lifetime warranty, and with each purchase made, we support our nation’s heroes by donating 3% of proceeds to veteran and first responder causes.
Siding nail rippers for surgical removal of siding and shingles
High-carbon steel for elite strength and durability
Crosshair centerline nail puller for fast nail extraction
Integrated ruler for quick measurements and gauging
Integrated bottle opener for field expedient hydration
100' drop-tested for extreme job site survivability

2023-07-12T06:11:26+00:00July 12th, 2023|Hand Tools, Power & Hand Tools, Tools & Home Improvement, Woodworking Amazon|
Read More

Council Tool WC20PA19C Wood-Craft Pack Axe, 19-Inch

The Council Tool Co.’s WOODCRAFT Pack Axe design is intended to produce a multi-functional premium axe which can successfully cut, chop, split, carve, shave, hew, hammer, aid in fire starting, and other key WOODCRAFT and outdoor activities. At 2.0 pounds, the Wood-Craft “Pack Axe” is made using 5160 steel, heat treated on both ends for superior strength and sharpness, and is sharpened using a Flat Grind of 25 Degrees for outstanding sharpness, bite, and holding a sharp blade. The innovative Phantom Bevels prevent the axe from sticking and allows for cleaner faster cutting, splitting, carving, hewing and other WOOD-CRAFT activities.superior strength, and this model comes with a 19” Premium Curved Hickory Handle (handle length is before hanging and assembly) and includes a high quality welted leather Mask to protect your Pack Axe from the elements and you from your extremely sharp Pack Axe.
19" HICKORY HANDLE
2LB HEAD
5160 STEEL
FLAT GRIND 25 DEGREES

2023-07-06T06:03:20+00:00July 6th, 2023|Hand Tools, Patio - Lawn & Garden, Woodworking Amazon|
Read More

Hand Saw, KERYE Hand Tools, 5.5 Inch Mini Pocket Folding Saw, SK5 Bla…

From the brand KERYE hand sawKERYE hand saw japanese tool wood workjapanese tool wood work

About us:

KERYE has always been dedicated to making tool usage easier and simpler. We believe better tools will attract more people to start woodworking and creating better products. And we believe you will always find the most suitable tool.

11 11 11 11 japanese wood saw smalljapanese wood saw small gifts for men woodworking toolsgifts for men woodworking tools

KERYE Hand Saw Series


【Portable Folding Saw】The KERYE pocket folding saw is small and portable, the flush cut saw is only 6.3 inches after folding, suitable for camping, outdoor.
【Flat Cut】The KERYE hand saw is made of High temperature quenching and has a 3-sided serrated sharp sawtooth to make the cut flat.
【SK5 Blade】KY03 is 5.5 inch long, 0.23 inch thick, double-sided serrated 13 & 14T. The hand saw is made of high quality SK5 steel, which is far superior to ordinary spring steel in terms of working life and metal elasticity.
【Double Edged】This wood saw has two sides with different shaped teeth,triple-beveled teeth for cutting soft woods such as pine and spruce; double-beveled teeth for cutting hard woods such as oak and maple, used for Cutting wet wood, dry wood, PVC, etc.
【High Quality Handle】The handle is made of ebony, which has higher wood strength than other materials and is less prone to cracking. Folding saw with safety latch, can prevent accidental injury by the saw teeth.
2023-07-04T05:57:28+00:00July 4th, 2023|Hand Tools, Power & Hand Tools, Tools & Home Improvement, Woodworking Amazon|
Read More

Square Drill Bit Woodworking Mortising Chisel Drill Bit Tool Set Wood…

Material: High Speed Steel (HSS);
Hardness: HRC 48~50;
Suitable for construction, installation, renovation, decoration industry, etc.
Ground and Hardened high speed steel for efficient performance and long life.
Apply for woodworking project,construction,installation,decoration industry.
Standard chip flute design, easy ty exclude side of the sawdust, improve drilling efficiency.
Excellent heat dissipation, so the bits won't be burning hot during long-time using.

Package Included:
1 x 1/2-Inch(12.7mm)
1 x 2/5-inch (10mm)
1 x 3/8-Inch(9.5mm)
1 x 5/16-Inch(8mm)
1 x 1/4-Inch(6.4mm)
Package Dimensions ‏ : ‎ 8.94 x 3.11 x 2.01 inches; 1.8 Pounds
Item model number ‏ : ‎ DLK-DLK-ZT
Date First Available ‏ : ‎ August 29, 2021
Manufacturer ‏ : ‎ Delangke
ASIN ‏ : ‎ B09DX373BN

Suitable for all mortise and drill accessories.These square drill bits made of high speed steel, Heat treatment, HRC48~50, high hardness,lengthened core, high concentricity, through heat processing, with high hardness drill bits, and sharp-edged square chisel, long life using.
It can be used with mortise and tenon machine to achieve double effect; Suitable for all mortise and drill accessories. The square drill bits need to be used in conjunction with the mortise machine. These drill bits not usable with a hand held drill. If you want to use these drill bits on drill press, you need accessories to connect to a drill press.
Professional wood drill bit, suitable for construction, installation, renovation, decoration industry, etc. Suitable for professional home use. Save time and cost, Reduce labor intensity of construction workers, speed up the construction speed, reduce construction costs for construction, installation, renovation, decoration industries.
This square drill bit is suitable for wood, including MDF, MDF, particle board, channel wood, pine wood, basswood, etc. Note: It is not suitable for processing metal, glass, plastic, concrete, gypsum board etc. If you're not satisfied with our products for whatever reason, just contact us, we will try our best. Do not hesitate, please buy it with confidence!

2023-06-25T05:44:29+00:00June 25th, 2023|Hand Tools, Power & Hand Tools, Tools & Home Improvement, Woodworking Amazon|
Read More

KingTool 325 Piece Home Repair Tool Kit, General Home/Auto Repair Too…

Product Description 325 HOME TOOL KIT325 HOME TOOL KIT 325A+970x600-1325A+970x600-1

325-PieceTool Set with Heavy Duty Case with Drawer

New Tool Box Design - The top of the case opens and most of the tools are stashed in there. There is also a tray that pulls out of the case with some other tools. This big case has a high-capacity containing good value tools with a quantity of 325-pieces.

325A+970x300-2325A+970x300-2 325A+970x600-2325A+970x600-2

325A+300x300325A+300x300

325A+300x300-2325A+300x300-2

325A+300x300-3325A+300x300-3

HIGH QUALITY WIDELY APPLICATION GOOD VALUE giftgift
[High Quality Material] - Made of high-quality steel and finished in heat treated chrome, durable and corrosion resistance. Handles made of TPR material, comfortable for grip.
[Muti-purpose Tools Kit] - 325Pcs tools set for most small repairs and DIY projects around the house. It is perfect for handyman, construction workers, mechanics, work shops etc. This tool set is also a good gift choice for family member, friends, partners, etc.
[Complete Varieties] - Comprehensive assortment of professional-grade wrenches, a complete range of 1/4 inch and 3/8 inch metric-sized sockets and precision screwdrivers, hammer, tape measure, pliers etc. The 72-tooth ratchet. Variety of 1/4-inch screwdriver bits: Phillips, slotted, square, star and pozi. Soft-grip handle on screwdrivers, pliers, srtipper and hammer provides excellent comfort and control.
[Great Gift Choice] -This tool kit is easy to carry and stock. It is a good gift choice for men and women. Also this tool set is perfect for Father's Day, and is a great option as gift for Dad, Boyfriend & Brothers when chrismas.
2023-06-22T05:39:45+00:00June 22nd, 2023|Hand Tools, Power & Hand Tools, Tools & Home Improvement, Woodworking Amazon|
Read More

Universal Table Vise 3 Inch, Home Vise Clamp-on Portable Bench Clamp,…

Universal Table Vise 3 Inch, 360° Swivel Base Universal Home Vise Portable Bench Clamp
High-Quality Materials：
The table vise is made of durable cast steel and chrome-plated spindle and nut for long-term durability, preservative.
Rubber Protective Case：
The rubber boot in Table Vise not only keeps fragile objects firmly in place, but it also provides a cushion to prevent any scratches or potential damage.
Easy Operation:
Smooth guide rail, the screw and handle functions smoothly and effortlessly.
360° Swivel Base:
perfect for a wide range of clamping angles.
Wide Usage:
Workbench vise is designed for home, workshop, professional use, general purpose and light work, suitable for woodworking, cutting conduit, drilling, gluing, metalworking, sanding or planning, sawing, etc.
Specification:
Thickness of the jaw: 0.2"/5mm

Maximum opening of jaw: 3"/76.2mm

Jaw width: 2.8"/71mm

Throat capacity: 2.5"/63mm

O-shaped swivel base: 1.57*1.18"/40*30mm
Package Included :
1x 3 Inch Table Vise（Black）
【Durable Material】 The table vise is made of durable cast steel and chrome-plated spindle and nut for long-term durability, preservative，and the jaws are quenched and re-fired for added hardness and strength.
【360°Swivel Base】 Designed with 360 degree rotate swivel base, Can be adapted to any working angle you need. Designed for home, workshop, professional use, general purpose and light duty work, this bench vice is ideal for woodworking, cutting conduit, drilling, gluing, metalworking, sanding or planing, sawing and more.
【Universal Bench Clamp Easy To Use And Install】 Round base and swivel lever design allows the vise to quickly grip a table or object, A table vise with a rubber blanket, if you need to clamp fragile items such as glass, you can attach the rubber blanket to the clip, which can effectively protect objects from scratches. Rubber blankets also protect the surface of a table or worktop from damage and leave no marks on the surface.
【Package Included and After-Sales Guarantee】 1x 3 Inch Table Vise（Black） Buy with confidence. We offer free returns and exchanges, if you have any questions, please feel free to contact us by email. We attach great importance to the shopping experience of each customer, and customer satisfaction is our unremitting pursuit.

2023-06-20T05:33:12+00:00June 20th, 2023|Hand Tools, Power & Hand Tools, Tools & Home Improvement, Woodworking Amazon|
Read More

KERYE Japanese Pull Saw 9.5 Inch, Hand Saw with Double Edges of 10/17…

From the brand KERYE hand sawKERYE hand saw japanese tool wood workjapanese tool wood work

About us:

KERYE has always been dedicated to making tool usage easier and simpler. We believe better tools will attract more people to start woodworking and creating better products. And we believe you will always find the most suitable tool.

KERYE Hand Saw Series

japanese wood saw smalljapanese wood saw small gifts for men woodworking toolsgifts for men woodworking tools woodworking hand sawwoodworking hand saw sharp durable easy to usesharp durable easy to use ryobi hand sawryobi hand saw hand dovetail saw woodworkinghand dovetail saw woodworking
【 Larger Working Area 】 Compared with 6 Inch saw, 9.5 inch pull saw enables larger working area for more working possibilities. Meanwhile, 9.5 inch saw saves at least 50% force than 6 inch in principles of Physics;
【 Sturdy Durable Material 】 We have blade made from SK5 high carbon steel, which is known for its hardness and wear-resistant; and we have handle made from beech and rattan, which is light and ergonomic for time and force saving;
【 3-Sided Grinding Teeth 】 As woodworking professional knows, saw with 3-sided grinding teeth is sharper and wear-resistant and thus has a longer life span. Besides, the denser side teeth are quenched to be harder;
【 2-in-1 Pull Saw 】 This bi-lateral saw has two sides with teeth, one with teeth of 10 TPI( rougher side) and the other, 17 TPI(denser side). The rougher side is more suitable for rip cut ( quick and less detailed cut ); the denser side is more suitable for cross cut ( comparatively slower and more detailed cut);
【 Reliable After Sale 】 We have 24 months after-sale support and 100% problem-solving service.
2023-06-19T05:31:24+00:00June 19th, 2023|Hand Tools, Power & Hand Tools, Tools & Home Improvement, Woodworking Amazon|
Read More

Boulder, CO 80302
Phone: (303) 532-5633‬
Email: vomark@areyoupop.com

© Copyright 2009 - 2023 | Designed By Micromango | All Rights Reserved

Affiliate Disclosure | Privacy Policy | Terms of Service | Contact Us

Go to Top