$379.00 - $339.99
(as of Apr 20,2021 10:41:36 UTC – Details)
452x 385x 316mm / 17.8″x15.16″x12.44″
Active Wokring Area
278x157x 45mm / 11″x6.18″x1.77″
Spindle Rated Power
775 Spindle 60W; 10000RPM
Compatible with all GRBL software.
Windows XP/7/8/10, Linux, MAC OS (some Mac OS version may not be compatible)
Practical and Aesthetic Transparent Enclosure
Transparent acrylic sheets enable user to view the engraving process from all sides. Old door handle is replaced by a more aesthetic design.New hinge joints the door and side acrylic plate more closely and leaves no gap any more.All-round protective case prevents dust and chips from scattering and keep adults and children from the high-speed rotating spindle and bit to avoid injury.
New Z-axis Spindle Clamp
The spindle clamp accommodates spindles with diameter of 42mm and 52mm, such as regular 775 spindle and 300W spindle.. It’s easy to upgrade to 300W spindle without changing the clamp.3018-SE V2 supports to use up to 20W power module.
(Power modules and 300W spindle are sold seperately)
Support Offline Controller
3018-SE V2 supports offline control.
(Offline controller sold seperately)
3018-SE is capable to carve and cut different materials such as plywood, MDF, PCB, acrylic, nylon, carbon fiber and soft metals like aluminum, copper and silver.CNC router machine is commonly used to DIY art crafts, make letters and signs and 3D relief sculpture etc.Students and CNC beginners can easily start learning CNC with 3018-SE. It helps develop practical competence.
New Spindle Clamp
Support Offline Control
Applicable to Many Material
Wide Applications: Engraving/Cutting/Drilling
Common problems & solutions
Q1: There is no COM when connect the machine to software.
1. Please check if the driver installed successfully. You can remove the driver, and re-install.
2. Check USB port and make sure it is completely connected. Power on the CNC machine.
3. Use another USB port for connection.
Q2: When I connect the software, it says “port open”.
1. Check the E-stop, make sure it is not pressed down. If it is pressed down, the machine cannot work even though you click unlock. In this case, you need to release the E-stop first, and then click unlock.
2. Check the limit switch. If any axis triggers the limit switch, the machine will lock, too. In this case, please follow this video to solve the limit switch problem.
Q3: I connect the machine to software successfully, but it can’t move any axis.
1. Each time you power on the machine, you need to click “unlock” button first, and then it can work.
2. Check the E-stop and limit switch as Q2.
Q4: I can’t engrave circle but an oval, what should I do?
Check the blue coupler and make sure it is tightened. Loosen coupler may cause losing steps during engraving and lead to inaccuracy.
Active Working Area
11″x 6.18″x 1.77″
15.75″x 15.75″x 2.56″
11.8″ x 7.1″ x 1.8”
Upgrade Z-axis Fixture
Accommodate 300W spindle and 5W/15W/20W module
Accommodate 5W/15W/20W module
What’s in the package:
1x 3018-SE CNC Router Machine (half-assembled)1x Transparent Enclosure1x Z Probe1x Cooling Fan4x Hold-down Clamp1x Brush1x Power Supply1x USB Cable1x U Disk1x User Manual
This 3018-SE has a transparent enclosure, which enable to watch the engraving process from every side. The new spindle mount not only can fit FoxAlien 5W and 20W modules directly, but also can upgrade to 300W spindle directly.
It’s an entry-level CNC router with enclosure for beginners and hobbyists. It is safer with a case to keep the spindle and dust inside while engraving. Limit switches and emergency stop switch are added to this machine for safety concern.
Optimized assembly method. Main parts are pre-installed in the factory. Wires are labeled clearly for fast assembly. A detailed manual will guide you put the enclosure together.
3018-SE is capable to carve and cut different materials such as plywood, MDF, PCB, acrylic and soft metals like aluminum and brass. It’s great for home DIY and small business.
The control board is based on open-sourced grbl software. It supports Windows XP/7/8/10, Linux, Mac OS.