https://www.AsWoodTurns.com

This hollow form is a combination project to explore a hollow form with fins in cross grain wood. The cherry is about half dry and could warp some but not a lot. I’m not counting on the project warping.

The hollow form is mounted as cross grain and shaped. Then drilled out and hollowed but was not hollowed out to the final wall thickness. Instead I left the walls very thick (at this point).

Then using a parting tool, I cut 1/8″+ grooves leaving 1/8″ fins. My goal was to leave about 1/2″ as a wall thickness between the bottom of the fin and the interior of the hollow form. It is 7″ diameter and 4″ tall finished with walnut oil.

Remember the Christmas Ornament Challenge submission period is November. Plan your ornament now.

Useful Previous Videos
Multi Dimension Fin Vase Green Woodturning

Enter your email at https://www.AsWoodTurns.com & I’ll let you know when the next easy woodturning project video is ready.

Blog: https://www.AsWoodTurns.com
FB: https://www.Facebook.com/AsWoodTurns
Music: Traumerei by Shumann performed by Becky Schlappi. Used by permission.

Likes: 2

Viewed:

source